worldinoutRegisterLogin | Set Homepage | Save desktop | Mobile | Qr code
Member
Ningbo Nijia Electronics Technology Company
Solenoid Valve Coil;Pneumatic Solenoid Coil;Hydraulic Solenoid Coil
 
Your current location:Home » Sell » 25 mm AC230V Pulse Jet Valve SCG353A044 Integral Pilot Valve

25 mm AC230V Pulse Jet Valve SCG353A044 Integral Pilot Valve

Click image to view full size image
Title: 25 mm AC230V Pulse Jet Valve SCG353A044 Integral Pilot Valve 
Brand: -
Model: -
Unit price: Negotiable
MOQ: -0 -
Quantity: Negotiable
Delivery date: Since the payment date Days delivery

Contact: Ricky (Ms.)    
Mobile:
Telephone:

  Inquiry
Details

 

ASCO Aluminum integral pilot valve 25 mm AC230V AC 1 " SCG353A044  pulse jet valve

 

 

Specification:

 

Ordering Code Port Size Orifice Flow Value Coil type
G Threaded mm m3/h l/min
SCG353A043 3/4" 20 14 233 400325
SCG353A043C 3/4" 20 14 233 0200
SCG353A044 1" 25 17 383 400325
SCG353A044C 1" 25 17 383 0200

 

OPTIONS:

 

1 Valves can also be supplied with FPM (fluorelastomer) diaphragms and seal materials. Use the appropriate optional suffix 'V' for identification
2 Sequential controller for pilot solenoid valves
3  Pilot boxes containing 2 to 12 pilot solenoid valves
4  Pilot solenoid valves can be equipped with explosionproof solenoids for hazardous locations according to “ATEX” and national standards

 

 

INSTAllATION:

1  Mount valves to inlet pipes and blow tube to valves, ensuring no excess thread sealant can enter the valve itself.
2  Apply moderate pressure to system and check for installation leaks. Fully pressurise system.
3 Test fire and listen for proper actuation and crisp pulse noise.
4 The valves can be mounted in any position without affecting operation,Threaded pipe connection is: G = G (ISO 228/1) or compression fittings
5  Other pipe threads are available on request, Installation/maintenance instructions are included with each valve, Spare parts kit and replacement coils are available
6  When connecting piping or tubing to the G1/8 connection in the valve bonnet, the remote ASCO pilot valve should be mounted as close as possible to the main pulse valve. Connection tubing lengths of 3 meter or less have little effect on the pulse response. Installations with over 3 meter of tubing must be tested under actual operating conditions. Tubing with Ø 6 mm O.D. is recommended for all installations
7  For compression fitting types tightness is achieved by the compressed gasket on the blow tube
8  Ensure tank and pipes are free from dirt, rust or other particulate. Ensure supply air is clean and dry.

 

DIMENSIONS (mm), WEIGHT (kg):

<
25 mm AC230V Pulse Jet Valve SCG353A044 Integral Pilot Valve
Inquiry
Sell
  • No Category
New Login
Company QR code
Anytime Anywhere Mobile