Click image to view full size image
Solenoid coil connector DIN43650B Pnuematic fittings Junction Box for 22 mm coil types
The connector system by NIJIA includes a complete range of solutions for the most common connections of the coils for solenoid valves.
The connectors with cable entry conform to Industry Standard DIN 43650 series are normally used to supply power to solenoid valves.
Specifications:
| DIN43650B | 2 + |
| Form | Industrial |
| Cable entry | PG 9 (6-8 mm) |
| Protection class | IP 65 (mated) IEC 60529 |
| Insulation group | VDE 0110 1/89 - Class C |
| Working voltage | AC 250 V max. - DC 300 V max. (IEC 664) |
| Nominal current | 10A (max. 16A / 40°C) |
| Contact resistance | ≤ 4 mΩ |
| Max conductor section | 3 x 1,5 mm2 |
| Gasket material | NBR |
| Fixing screw | M3 x 32 |
Product features:
• Fix screw end stop to prevent curvature and damage to the housing when assembled
• Visible external tampo print for identification of circuit type and voltage
• Robust design with wide space to facilitate cable assembly to the contact
• One piece contact insert secured by spring lo ded lugs
• Protection spring between fixing screw and contact to prevent conductor damage during assembly
| Insulation group | VDE 0110 1/89 - Class C |
| Working voltage | AC 250 V max. - DC 300 V max. (IEC 664) |
| Nominal current | 10A (max. 16A / 40°C) |
| Contact resistance | ≤ 5 mΩ |
| Max conductor section | 3 x 1,5 mm2 |
| Gasket material | NBR |
| Fixing screw | M3 x 30 |
Drawings:
Application:
The connectors are rated to offer protection to IP 65 (complying to IEC 60529) that means reliable performance when exposed to fluids and dust, when correctly assembled with the gaskets and screws which complete the package.
The robust one piece contacts are produced in silver plated brass.
It has been paid particular attention to the contact with a new design which offers protection between the screw and the wire to prevent damage to the conductors during assembly, and as a result provides a totally secure connection.
The circuit diagram is printed externally on top of each connector to assist circuit identification
